[c-nsp] Destination NAT with multiple port range between VRF
Dol Meun
dol at eintellegonetworks.asia
Tue Jun 18 00:01:50 EDT 2013
*Dol Meun - *eintellego Networks Pty Ltd
Networks Operation - Level 2 - Asia
dol at eintellegonetworks.asia; www.eintellegonetworks.com
Cell (+855) 1525 6804 ; skype://dolmeun
facebook.com/eintellegonetworks ; linkedin.com/in/dolmeun
<http://www.eintellegonetworks.com/sig/einsig.png>
The Experts Who The Experts Call
Juniper - Cisco - Cloud
On Tue, Jun 18, 2013 at 10:10 AM, Dol Meun <dol at eintellegonetworks.asia>wrote:
> Hi All,
>
> if there anyone has experience with Destination NAT with multiple port
> range between VRF. I am wanting to access 203.10.10.1 port 22 and want it
> forward to 192.168.50.2 port 22.
>
> Here is my Network:
>
> Server(192.168.50.2) -----------------VRF Server----------[(192.168.50.1)
> fa1 (Cisco Router) fa0
> (203.10.10.1)]--------------------------------(Internet)
>
> interface FastEthernet0
> ip address 203.10.10.1 255.255.255.248
> ip nat enable
> ip tcp adjust-mss 1412
> end
> interface FastEthernet1
> ip vrf forwarding Server
> ip address 192.168.50.1 255.255.255.0
> ip nat enable
> ip tcp adjust-mss 1412
> end
>
> ip nat pool TEST_EN_2 192.168.50.2 192.168.50.2 netmask 255.255.255.0
> type rotary
> ip nat inside destination list 119 pool TEST_EN_2
> access-list 119 permit tcp any host 203.10.10.1 range 1 4000
>
> Is there anyway to make Destination NAT with multiple ports range working?
>
> Best Regards,
> Dol
>
> *Dol Meun - *eintellego Networks Pty Ltd
> Networks Operation - Level 2 - Asia
> dol at eintellegonetworks.asia; www.eintellegonetworks.com
>
> Cell (+855) 1525 6804 ; skype://dolmeun
>
> facebook.com/eintellegonetworks ; linkedin.com/in/dolmeun
>
> <http://www.eintellegonetworks.com/sig/einsig.png>
>
> The Experts Who The Experts Call
> Juniper - Cisco - Cloud
>
More information about the cisco-nsp
mailing list