[c-nsp] IPv6 Deployment / 6PE

[Mohammad Khalil]

Check the link below
http://eng-mssk.blogspot.com/2012/10/mpls-l3-vpn-6pe-ebgp-pe-ce-routing.html

BR,
Mohammad

> Date: Fri, 21 Jun 2013 13:57:16 +0300
> From: hilmy.aa at gmail.com
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] IPv6 Deployment / 6PE
> 
> Dear Friends,
> I am working on IPv6 deployment at our Backbone.
> Our network design is as below:
> 
> PEs --- MP-BGP ---RR ( address-family vpnv4 )
> RR------ BGP-----IGW  ( address-family ipv4  )
> 
> what i understand is :
> 
> - Add address family IPv6 at PEs :
> address-family ipv6
>   neighbor x.x.x.x activate    ( x.x.x.x is IPv4 address of RR )
>   neighbor x.x.x.x send-community both
>   exit-address-family
> 
> - Add address family IPv6 at RR
>  address-family ipv6
>   neighbor y.y.y.y send-community both (y.y.y.y  is IPv4 address of PE )
>   neighbor y.y.y.y route-reflector-client
>   neighbor y.y.y.y.y activate
> 
> - Add  address-family vpnv6 ( RR-----IGW )
> 
> This is the plan , i dont know if i am missing something.
> 
> I have Full BGP table IPv4+ IPv6 from my UP LINKS , in order to deploy IPv6
> so i need MP-BGP  ( RR--- IGW ).
> We can say MP-BGP ( vpnv4 ) will carry IPv6 packets as a label across IPv4
> MPLS Backone.
> Thanks in advance for sharing info.
> 
> Regards,
> Ahmed
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/