[c-nsp] IPv6 Deployment / 6PE

[Ahmed Hilmy]

Thanks Mikeal,

I have seen this dos and it is super useful, but still i need to confirm
the plan for you guys !!!

Regards,
Ahmed


On Fri, Jun 21, 2013 at 2:16 PM, Mikael Abrahamsson <swmike at swm.pp.se>wrote:

> On Fri, 21 Jun 2013, Ahmed Hilmy wrote:
>
>  Dear Friends,
>> I am working on IPv6 deployment at our Backbone.
>> Our network design is as below:
>>
>> PEs --- MP-BGP ---RR ( address-family vpnv4 )
>> RR------ BGP-----IGW  ( address-family ipv4  )
>>
>> what i understand is :
>>
>> - Add address family IPv6 at PEs :
>> address-family ipv6
>>  neighbor x.x.x.x activate    ( x.x.x.x is IPv4 address of RR )
>>  neighbor x.x.x.x send-community both
>>  exit-address-family
>>
>
> Excellent document from cisco on the matter:
>
> <http://www.cisco.com/en/US/**products/sw/iosswrel/ps1835/**products_data_
> **sheet09186a008052edd3.html<http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_data_sheet09186a008052edd3.html>
> >
>
> You need "send-label".
>
> --
> Mikael Abrahamsson    email: swmike at swm.pp.se
>