[c-nsp] NetflowAuditor

[Paul Stewart]

Going by memory I think we were trying to do 2000 or so FPS....

Cheers,

Paul


From:  John Elliot <johnelliot67 at hotmail.com>
Date:  Thursday, 20 June, 2013 3:35 PM
To:  Paul Stewart <paul at paulstewart.org>, Cisco-NSP
<cisco-nsp at puck.nether.net>
Subject:  RE: [c-nsp] NetflowAuditor

> 
> Thanks Paul - How many flows per second were you doing?
> 
> 
> I'll certainly be trialling it.
> 
> 
> Cheers.
> 
>> > Date: Thu, 20 Jun 2013 14:42:28 -0400
>> > Subject: Re: [c-nsp] NetflowAuditor
>> > From: paul at paulstewart.org
>> > To: johnelliot67 at hotmail.com; cisco-nsp at puck.nether.net
>> > 
>> > Hey thereŠ.
>> > 
>> > We used it quite some time back and it was "ok".  Our issue with it was
>> > scaling - once we started to do 1:100 sampling across several routers it
>> > had a really difficult time keeping up.  The hardware we were using was
>> > "beefy" Š. Granted this was quite a while back when we were using GSR's
>> > 12012 and 12410 specificallyŠ.
>> > 
>> > Since, we bought some other packages and finally just went with Arbor -
>> > not cheap solution but works well for our needs...
>> > 
>> > Best advice I can think of would be to get a trial version and test it..
>> > 
>> > Cheers,
>> > Paul
>> > 
>> > 
>> > On 2013-06-19 6:42 PM, "John Elliot" <johnelliot67 at hotmail.com> wrote:
>> > 
>>> > >Hi,
>>> > >
>>> > >Just wondering if anyone has used this product?
>>> > >(http://netflowauditor.com/)
>>> > >
>>> > >Any comments/experiences are greatly appreciated.
>>> > >
>>> > >Thanks.     
>>> > >_______________________________________________
>>> > >cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> > >https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> > >archive at http://puck.nether.net/pipermail/cisco-nsp/
>> > 
>> > 
>