[c-nsp] ipv6 on dot11radio interface of 1811?

[Peter Rathlev]

On Tue, 2013-06-25 at 12:54 -0400, David Hubbard wrote:
> Hi all, I was wondering if there is an ios version that definitely lets
> you add ipv6 to the actual dot11radio interfaces of an 1811w?
...
> If it's not possible, does the 1941W let you do it?

I'm not familiar with 1811W but on the 1941W the router itself doesn't
have any dot11radio interfaces. It has a GE trunk towards a built-in but
otherwise stand-alone access point (AP801AGN-E-K9 or thereabout). 

On the 1941W running C1900-UNIVERSALK9-M 15.1(3)T1 (securityk9) that I'm
looking at now the AP is running AP801-K9W7-M 12.4(21a)JA1 and supports
neither any "ipv6" nor any "ip6" commands AFAICT.

> use a BVI (not possible in my case due to how it's being used)

I know there's probably a good reason, but I'm curious as to what it
could be since I'd exactly use a BVI for this. Anything you can share?

-- 
Peter