[c-nsp] sh mfib route rate

[John Neiberger]

I'm not at a router right now, so I can't check this, but do you you get
better (or different) results if you do "show mfib hardware route
statistics" instead? That doesn't show rate information, but it seems to
update very quickly as I recall.

John


On Wed, Jun 26, 2013 at 3:07 AM, Adam Vitkovsky <adam.vitkovsky at swan.sk>wrote:

> Hi Folks,
>
> Is there a knob (may be hidden) to speed up the refresh interval of "sh
> mfib
> route rate" output please?
>
> The inactive streams seem to be hanging in there for at least 10 minutes or
> so which is always annoying during troubleshooting.
>
>
>
> adam
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>