[c-nsp] 4500-X VSS %EC-5-CANNOT_BUNDLE2

[Edward Salonia]

'sho run in te1/16'

Sounds like you have dtp on it currently and it doesn't like that... Try defaulting the interface first?


------Original Message------
From: CiscoNSP List
Sender: cisco-nsp-bounces at puck.nether.net
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 4500-X VSS  %EC-5-CANNOT_BUNDLE2
Sent: Mar 7, 2013 9:39 PM



Hi Guys,

Following this guide: https://supportforums.cisco.com/docs/DOC-29472 and when trying to add the physical Int to the portchan, I get:

%EC-5-CANNOT_BUNDLE2: TE1/16 is not compatible with PO5 and will be suspended (trunk mode of TE1/16 is dynamic, P05 is trunk)

Config has been entered as per the above doc - Any suggestions as to why this is happening?

Both switches are running: 
cat4500-e-ios-promupgrade-150-1r-SG7cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin


Cheers.

 		 	   		  
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/