[c-nsp] Route-Reflector & Sub-optimal Routing

sherif mostafa sherifmka2004 at hotmail.com
Tue Mar 12 04:48:55 EDT 2013


Hello All,

I don't know what's the "Add Path" attribute, could you illustrate more & send me the commands knowing that Routers' are IOS 2800 series.
Thanks,
Thank you & Best Regards,
Sherif Mostafa

Date: Mon, 11 Mar 2013 08:21:38 -0700
From: juxiangt at yahoo.com
Subject: Re: [c-nsp] Route-Reflector & Sub-optimal Routing
To: sherifmka2004 at hotmail.com; cisco-nsp at puck.nether.net; adam.vitkovsky at swan.sk

Yes. You can do it with BGP "Add path" attributes. It should be a available now.
 
-Judy

--- On Mon, 3/11/13, Adam Vitkovsky <adam.vitkovsky at swan.sk> wrote:


From: Adam Vitkovsky <adam.vitkovsky at swan.sk>
Subject: Re: [c-nsp] Route-Reflector & Sub-optimal Routing
To: "'sherif mostafa'" <sherifmka2004 at hotmail.com>, cisco-nsp at puck.nether.net
Date: Monday, March 11, 2013, 1:19 PM


>Is there any method to allow the Route-Reflector to send all routes to
clients (not the best one)? 
If you have mpls in your core, you can use unique RD per VRF per PE -this
will allow the RR to consider all the paths for a particular prefix as
unique prefixes and advertise all of them to the PEs. 

adam

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
 		 	   		  


More information about the cisco-nsp mailing list