[c-nsp] SYSTEM_CONTROLLER / Cisco 7606

[Ahmed Hilmy]

Hello Devon,

Kindly, find below output:

#remote command switch show bootvar

BOOT variable = bootdisk:c7600s3223-advipservicesk9-mz.122-33.SRD4.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

Register value is correct as i think, what do you think ? what else we can
check ?

Regards,
Ahmed

On Fri, Mar 15, 2013 at 7:43 PM, Devon True <devon at noved.org> wrote:

> Ahmed,
>
> > Thanks for your quick reply. Actually IOS version is  12.2(33)SRD4,
> > we will upgrade it soon.
> >
> > But the router didn't reload normally, we forced router to reload
> > manually then it comes up and the ISO has been stored in
> > sup-bootdisk.
>
> We had something similar and the config-register on the SP was 0x0 but
> the RP was 0x2102.
>
> What does "remote command switch show bootvar" display?
>
> --
> Devon
>