[c-nsp] asr1002-f monitor esp performance

MKS rekordmeister at gmail.com
Wed Mar 20 06:18:35 EDT 2013


>Is it possible to monitor the performance of the ESP  in the ASR 1000 series.
>We  have the asr 1002-F andThe ESP is listed at 2.5Gbps. We would like to see when were getting close to that.

We use this command on a asr 1001

show platform hardware qfp active datapath utilization

The bottom line shows processing load in %

//MKS


More information about the cisco-nsp mailing list