[c-nsp] asr1002-f monitor esp performance

[Pete Lumbis]

You can use the command "show platform hardware qfp active datapath
utilization" to see current QFP/ESP utilization.

>From an SNMP perspective you're looking for CISCO-ENTITY-QFP-MIB

http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1mib3.html#wp2129069

which will be OID 1.3.6.1.4.1.9.9.715

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.715&translate=Translate&submitValue=SUBMIT

Hope this helps.

-Pete


On Tue, Mar 19, 2013 at 11:39 AM, marc williams <marcuk at me.com> wrote:

> Is it possible to monitor the performance of the ESP  in the ASR 1000
> series.
> We  have the asr 1002-F andThe ESP is listed at 2.5Gbps. We would like to
> see when were getting close to that.
>
> --
> Marc
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>