[c-nsp] Question about SVI interface acl counters + way of working

[Dan Brisson]

On my SUP720s, I've used "sh tcam int vlan xxx acl out ip" with some 
success.

-dan


On 3/20/2013 11:12 AM, Gert Doering wrote:
> Hi,
>
> On Wed, Mar 20, 2013 at 03:42:09PM +0100, "Rolf Hanßen" wrote:
>> Does that ACL not filter all traffic passing the interface or why does the
>> delta of ACL hits not match the number of incoming pps ?
> The ACL only counts (and lots) packets punted to the RP, and not
> "all of it".  At least on Sup720... no idea about Sup2T.
>
> gert
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/