[c-nsp] ipv6 on esr 10k

[Brian Turnbow]

Hello Everyone,

We are rolling out IPV6 services to our xdsl users  and I am looking for an answer regarding esr 10ks and ipv6( Pre2s running 12.2(33)SB13).
It works :-) , but we have been unable to find a way to activate ipv6 without creating a full virtual access interface.
I've been looking at archives of various lists , checking docs and talking to various SEs but there seems to be some conflicting information...
I've found posts saying ipv6 and ppp with  pxf is a no go on esrs, but others of people doing it..
With a Virtual template configured for IPv6,  a test virtual interface shows that sub interfaces can be created .
However as soon as we pass down any ipv6 atttributes via radius , a full virtual interface gets created.

Does anyone have experience doing ipv6 on esr and not creating full virtual access interfaces?


Thanks

Brian 



---
This e-mail is intended only for the addressee named above. 
As this e-mail may contain confidential or privileged information, 
if you are not the named addressee, you are not authorized to retain, read, 
copy or disseminate this message or any part of it.   
 
Please consider your environmental responsibility before printing this e-mail.