[c-nsp] ASR1001 which memory RP1 oder RP2 ???

[Pete Lumbis]

Yep, 1001 is a stand out. The memory for RP1/RP2 is not useable in a 1001.


On Fri, Mar 22, 2013 at 10:31 AM, Nikolay Shopik <shopik at inblock.ru> wrote:

> ASR1001 have their own designed RP something between RP1 and RP2 by
> performance of CPU, its Dual-Core 2.2GHz.
> RP1 is 1.5GHz Freescale 8548
> RP2 is Dual-Core 2.66GHz (XEON)
>
> On 22/03/13 12:40, Christian Kratzer wrote:
> > Hi,
> >
> > we a have a pair of ASR1001 with 4GB ram and want to max them out with 8
> > or 16 GB of ram.  We are planning on getting one of these part numbers
> > from a third party supplier:
> >
> >   Cisco ASR1001 8GB RAM M-ASR1K-1001-8GB=
> >   Cisco ASR1001 16GB RAM M-ASR1K-1001-16GB=
> >
> > Is there any command we could use to check if we have an RP1, RP2
> > whatever and somehow validate above choices ?
> >
> > All I can dig up is following:
> >
> > # show version
> >
> >   cisco ASR1001 (1RU) processor with 1163580K/6147K bytes of memory.
> >   Processor board ID xxxxxxxxxx
> >   9 Gigabit Ethernet interfaces
> >   32768K bytes of non-volatile configuration memory.
> >   4194304K bytes of physical memory.
> >   7782399K bytes of eUSB flash at bootflash:.
> >
> > # show platform diag
> >
> >   Chassis type: ASR1001
> >   ...
> >   Slot: R0, ASR1001
> >     Running state               : ok, active
> >     Internal state              : online
> >     Internal operational state  : ok
> >     Physical insert detect time : 00:00:43 (1w1d ago)
> >     Software declared up time   : 00:00:43 (1w1d ago)
> >     CPLD version                : 10042219
> >     Firmware version            : 15.0(1r)S
> >
> >   Slot: F0, ASR1001
> >     Running state               : ok, active
> >     Internal state              : online
> >     Internal operational state  : ok
> >     Physical insert detect time : 00:00:43 (1w1d ago)
> >     Software declared up time   : 00:01:31 (1w1d ago)
> >     Hardware ready signal time  : 00:01:20 (1w1d ago)
> >     Packet ready signal time    : 00:01:37 (1w1d ago)
> >     CPLD version                : 10042219
> >     Firmware version            : 15.0(1r)S
> >
> > # show inventory
> >
> >   NAME: "module R0", DESCR: "Cisco ASR1001 Route Processor"
> >   PID: ASR1001           , VID: V02, SN: xxxxxxxxxxx
> >
> >
> > Greetings
> > Christian
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>