[c-nsp] Switching Loops

[Andrew Miehs]

Spanning tree is automatically enabled on the Cisco switches- you don't
need to configure anything. Alternatively, you can use a port-channel but
you would need to configure that.
HP Procurve switches come with spanning tree disabled.





On Mon, Mar 25, 2013 at 6:12 PM, M K <gunner_200 at live.com> wrote:

> Hi I was wondering if I can avoid switching loops without turning on
> spanning tree ?I have two connections between two switches and they are
> configured as access in the same vlan , and i do not want to configure
> spanning tree , how to avoid loops ?
> Thanks
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>