[c-nsp] VS-S2T-10G card with WS-X6748-SFP Card => DFC Problems

[Olivier CALVANO]

Hi

i have a Cisco 6504E with a VS-S2T-10G and a small problems with two card:

*Mar 25 17:20:06.375: %C6KENV-2-DFCMISMATCH: Module 2 DFC incompatible
with Supervisor DFC.  Power denied
*Mar 25 17:20:09.299: %C6KENV-2-DFCMISMATCH: Module 3 DFC incompatible
with Supervisor DFC.  Power denied

Anyone know a solution to this problems ?


Router#sh module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1    5  Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G       SAL1618BM8W
  2   16  CEF720 16 port 10GE                    WS-X6716-10GE      SAL16159VEP
  4   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL1536PBFG

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  e05f.b910.942e to e05f.b910.9435   1.3   12.2(50r)SYS 15.1(1)SY    Other
  2  5057.a866.6828 to 5057.a866.6837   1.1   Unknown      Unknown      PwrDown
  4  0007.7d36.9918 to 0007.7d36.9947   4.2   Unknown      Unknown      Other

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  1  Policy Feature Card 4       VS-F6K-PFC4        SAL1616ACGX  1.2    Other
  1  CPU Daughterboard           VS-F6K-MSFC5       SAL1618BNAS  1.4    Other
  2  Distributed Forwarding Card WS-F6700-DFC3C     SAL16138H3N  1.5    PwrDown
  4  Centralized Forwarding Card WS-F6700-CFC       SAL1538QQ27  4.1    Other

Mod  Online Diag Status
---- -------------------
  1  Unknown
  2  Not Applicable
  4  Unknown
Router#


thanks
Olivier