[c-nsp] Ospf error message

Rati , Berikaant Jokhadze iinfo83 at gmail.com
Wed Mar 27 05:31:47 EDT 2013


It's happening often when two different vendor devices is connected each 
other , LSA is recieved with different Checksum , just try to reload 
proccess on both side.
On 03/27/2013 01:16 PM, Harry Hambi wrote:
> Good morning all,
> Can anybody help with the following error message,
>
> Mar 27 08:57:34:N:OSPF: intf rcvd bad pkt: Bad Checksum, rid 10.72.130.42, intf
> addr 10.10.128.150, pkt size 1456, checksum 23730, pkt src addr 10.10.128.149,
> kt type link state update
>
>
>
>
> Rgds
> Harry
>
> Harry Hambi BEng(Hons)  MIET  Rsgb
>
>
>
> ------------------------------------
> http://www.bbc.co.uk
> This e-mail (and any attachments) is confidential and
> may contain personal views which are not the views of the BBC unless specifically stated.
> If you have received it in
> error, please delete it from your system.
> Do not use, copy or disclose the
> information in any way nor act in reliance on it and notify the sender
> immediately.
> Please note that the BBC monitors e-mails
> sent or received.
> Further communication will signify your consent to
> this.
> ------------------------------------
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list