[c-nsp] OSPF Multiple Area links question

[judy teng]

This is info I got from standards but I was told that there is no bb dependency from TAC. It is still under test.

Thanks,
Judy


________________________________
 From: ITLabworks Globaldesk <globaldesk at itlabworks.com>
To: cisco-nsp at puck.nether.net; juxiangt at yahoo.com 
Sent: Thursday, May 2, 2013 12:17 PM
Subject: Re: [c-nsp] OSPF Multiple Area links question
 

Thats right. links must originate from the backbone or area directly 
connected to the back bone.

Regards,

BEN
ITLabworks

Op 2-5-2013 0:56, judy teng schreef:
> I think I have a solution which only works for areas attached to area 0 on ABRs.
>
>
> ________________________________
>   From: judy teng <juxiangt at yahoo.com>
> To: cisco-nsp <cisco-nsp at puck.nether.net>
> Sent: Wednesday, May 1, 2013 3:29 PM
> Subject: OSPF Multiple Area links question
>  
>
>
> Hello,
>
> Can somebody tell if OSPF multiple area link work for any two standard areas? We know that it works with one backbone area and one standard area.
>
> Thanks,
> Judy
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/