[c-nsp] copy config

[Aaron]

ctrl+c, ctrl-v

I only know copy and paste. I don't believe there is a command to do what
you are asking.


On Wed, May 8, 2013 at 4:47 AM, amir agha <monitor64 at yahoo.com> wrote:

> Hi list
> Is there any command/ command syntax to copy running configuration of one
> interface e.g interface serial1/0 onto another Interface e.g interface
> serial1/3. In switching we have an option of HSRP VRRP etc.
> Any help ??????
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>