[c-nsp] NXOS - 'format' command missing ?

Brandon Applegate brandon at burn.net
Fri May 10 13:42:01 EDT 2013


Hello,

I did some searching on this, and couldn't find anyone else complaining of 
it - so I figured I'd ask here.

Got some 5548UP's, they were running 5.1.something out of the box, just 
put 5.2(1)N1(4) on them.  Same issue with original code as well as new.

Cisco docs state there is a 'format' command.  You should be able to use 
this on usb1: for example (the USB port near mgmt0/console).  Here is what 
I have:

   ...
   event            Event Manager commands
   find             Find a file below the current directory
   gunzip           Uncompresses LZ77 coded files
   gzip             Compresses file using LZ77 coding
   hardware         Change hardware usage settings
   install          Upgrade software
   ...

It's not 'hidden' either.

n5kup-1# format
           ^
% Invalid command at '^' marker.
n5kup-1# format usb1:
           ^
% Invalid command at '^' marker.

Any info would be appreciated, even if 'yes it doesn't exist, you're not 
crazy'.  Thanks.

--
Brandon Applegate - CCIE 10273
PGP Key fingerprint:
8779 B023 7637 CEC8 C5C6 4052 664D 7E08 3CBB 1739
"SH1-0151.  This is the serial number, of our orbital gun."



More information about the cisco-nsp mailing list