[c-nsp] IPv6 Transition - IP/MPLS Backbone

[Xu Hu]

Are u talking about the inter-as mpls/vpn?
On Apr 17, 2013 3:29 PM, "Mattias Gyllenvarg" <
Mattias.Gyllenvarg at bredband2.se> wrote:

> Beware of one thing 6PE can not do.
>
> BGPv6 over multi-hop will not work as there is no recursive lookup from v6
> too v4 in your BGP speaker.
> This is a feature, not a bug... so it will not be fixed.
>
> Otherwise 6PE is a breeze.
>
>
> On 14 April 2013 21:56, Ahmed Hilmy <hilmy.aa at gmail.com> wrote:
>
> > Hello Expert,
> >
> > We are planning to deploy IPv6 at our IPv4 Backbone, our PE to as Dual
> > Stack and carry IPv6 packet through MPLS label.
> > There are different scenarios, one of them is 6PE.
> > Would you please guide me from where can i start ?
> >
> > Thanks,
> >
> > Ahmed
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>
>
> --
> *Med Vänliga Hälsningar - Best Regards*
>
> *Mattias Gyllenvarg*
> *Nätutveckling*
> Bredband2
>
> Tel: +46 406219712
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>