[c-nsp] ME-3600 Can't see ip pim vrf neighbor

[Fredrik Vöcks]

Hi Waris,

Not very much. But the 250 MDT routes are quite expensive since you loose
8000 ipv4 routes.

Any plans to change this in the future?

Regards,

Fredrik Vöcks
Senior IP Network Engineer



On 24 May 2013 01:21, Waris Sagheer (waris) <waris at cisco.com> wrote:

> Folks,
> Is it not documented properly regarding SDM template?
>
> Best Regards,
>
> [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]
>
> Waris Sagheer
> Technical Marketing Manager
> Service Provider Access Group
> waris at cisco.com<mailto:waris at cisco.com>
> Phone: +1 408 853 6682
> Mobile: +1 408 835 1389
>
> CCIE - 19901
>
>
> <http://www.cisco.com/>
>
>
>
> [Think before you print.] Think before you print.
>
> This email may contain confidential and privileged material for the sole
> use of the intended recipient. Any review, use, distribution or disclosure
> by others is strictly prohibited. If you are not the intended recipient (or
> authorized to receive for the recipient), please contact the sender by
> reply email and delete all copies of this message.
>
> For corporate legal information go to:
> http://www.cisco.com/web/about/doing_business/legal/cri/index.html
>
>
>
> From: Claes Jansson <claes at gastabud.com<mailto:claes at gastabud.com>>
> Date: Thursday, May 23, 2013 5:34 AM
> To: PlaWanSai <pws_admin at thaicpe.com<mailto:pws_admin at thaicpe.com>>
> Cc: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <
> cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
> Subject: Re: [c-nsp] ME-3600 Can't see ip pim vrf neighbor
>
> Also be sure to use
>
> ip pim ssm default
>
> and
>
> sdm prefer applications
>
> By default "MDT mroutes" are 0...
>
> I have tested this on 15.3(2)S.
>
> Claes Jansson
> Gästabudstaden AB
>
> On 2013-05-23 08:38, PlaWanSai wrote:
> I try to run Multicast VPN on the ME-3600 back-to-back with the 7609. It
> does not see pim neighbor. I tested on 15.1(2)EY4, 15.3(1)S and 15.3(2)S
> IOS
> version. I used this configuration between 7609 is work.
>
>
>
> test-co3600#sho ip pim vrf IPTV-M nei
>
> PIM Neighbor Table
>
> Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,
>
>         P - Proxy Capable, S - State Refresh Capable, G - GenID Capable
>
> Neighbor          Interface                Uptime/Expires    Ver   DR
>
> Address
>  Prio/Mode
>
> test-co3600#
>
>
>
> Thank you very much.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:
> cisco-nsp at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:
> cisco-nsp at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>