[c-nsp] 6500 Supervisor redendancy

Edward Salonia ed at edgeoc.net
Wed May 29 11:28:02 EDT 2013


While your mileage may vary I have has great success in doing this exact thing. RMA sups don't necessarily come with the same code as what you are running. Put the new sup in (same hardware, right?) and it should boot up into RPR standby cold due to the mid matched code. At this point copy the code from the flash of one sup to the other 'wr mem', check 'show red' to ensure config reg and boot var are correct and a 'redundancy reload peer' should do the trick.

Out of curiosity, what code are you running on this?

Also is your box configured for SSO mode currently and is running in simplex, or is it configured for RPR. If the latter, I think it may require a reload to change modes, but I don't recall.

Good luck.

- Ed


On May 28, 2013, at 5:10 PM, "Ben Hammadi, Kayssar (NSN - TN/Tunis)" <kayssar.ben_hammadi at nsn.com> wrote:

> Hi, 
> 
>   My major concern is about the IOS difference , should I find a way to check what is the IOS on the new Supervisor or this will not make difference , I read the successful stories in Cisco websites but here I am asking people who really did that on live Switchs. 
> 
> Br.
> 
> BEN HAMMADI Kayssar
>  
> NOKIA SIEMENS NETWORKS
> Lead Engineer -BroadBand Connectivity
> JNCIE-M (#471), JNCIE-SP (#1147), CCIP 
> 
> 
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of ext Justin M. Streiner
> Sent: Tuesday, May 28, 2013 9:58 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] 6500 Supervisor redendancy
> 
> On Tue, 28 May 2013, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote:
> 
>>  I have a 6509 with a standalone Sup720 and I am preparing to add a 
>> redundant one, I don't know the software on the new Supervisor and my 
>> final goal is to make both work on SSO mode. Can someone propose a 
>> procedure with happy end :) ?
> 
> There are numerous resources online that talk about how to configure dual 
> supervisors in a Cat6500 switch.
> 
> You might be better off asking specific questions, based on things you've
> tried or read through, rather than asking other people to do the majority 
> of the work for you.
> 
> jms
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list