[c-nsp] Catalyst 6506 continually rebooting after mls cef maximum-routes ip change

[Vinny_Abello at Dell.com]

Thanks Pete. I'll keep this in mind if the config-register doesn't do the trick.

-Vinny

-----Original Message-----
From: Pete Templin [mailto:petelists at templin.org] 
Sent: Thursday, May 30, 2013 9:31 PM
To: Abello, Vinny
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Catalyst 6506 continually rebooting after mls cef maximum-routes ip change

On 5/30/13 8:27 AM, Vinny_Abello at Dell.com wrote:

> Any hints as what to look for on this switch to determine why
> increasing the maximum IPv4 routes won't stick and causes it to
> reboot every 5 minutes? I suspected maybe it's short on some
> resources like RAM or something, but it seems to be identical to my
> working ones from all the show mls commands I'm checking.

I've had similar issues, and I'm fairly certain that the SP config 
register was correct at 0x2102.  For me, the only successful fix has been a:

copy run bootflash:snapshot
write erase
reload
set the max routes, reboot
confirm the max routes
copy bootflash:snapshot run
(no-shut everything relevant)
copy run start
reload
confirm the max routes
breathe a sigh of relief

I wish I knew better what the underlying issue was.

pt