[c-nsp] DHCP Over Xconnect

[Nicolas KARP]

Hi Mohammad,

I think you did because it should work :)  What about the "show xconnect
all" ? And btw, if you put a static IP on the remote end of the tunnel, are
you able to ping the DHCP server ?

BR,

# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -
# - -   Nicolas KARP
# - -   Network and Security Engineer
# - -    Linkedin :  http://www.linkedin.com/in/nicolaskarp
# - -    Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp
<http://www.viadeo.com/fr/profile/nicolas.karp%20>
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -


2013/11/8 Mohammad Khalil <eng_mssk at hotmail.com>

> Hi all
> I have established xconnect between two PE routers using sub interfaces
> toward the CEs
> The xconnect is up as shown in the show mpls l2transport summary
> one of the CEs is acting as DHCP server and the other one is acting as a
> client but the DHCP binding did not take place , am i missing something ?
>
> BR,
> Mohammad
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>