[c-nsp] %PLATFORM-CIH-5-ASIC_ERROR_SCRUB_THRESH

[Antonio Soares]

I can confirm that the reload solved the issue. It was a 1x100GBE/CRS-FP140 pair of cards.

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares at netcabo.pt
http://www.ccie18473.net



-----Original Message-----
From: Edward Salonia [mailto:ed at edgeoc.net] 
Sent: quarta-feira, 6 de Novembro de 2013 16:33
To: Antonio Soares
Cc: <Jean-Francois.Dube at videotron.com>; cisco-nsp; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] %PLATFORM-CIH-5-ASIC_ERROR_SCRUB_THRESH

There should be an SMU to suppress those "informational" messages. Apparently they resulted in a bunch of unnecessary RMA's.

- Ed

On Nov 6, 2013, at 7:13, "Antonio Soares" <amsoares at netcabo.pt> wrote:

Thank you for the feedback. It's good to know that the reload worked for you.

The new bug tool shows that 65 support cases were opened for this issue:

https://tools.cisco.com/bugsearch/bug/CSCts11174

If it was something severe, we would know it.


Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares at netcabo.pt
http://www.ccie18473.net



-----Original Message-----
From: Jean-Francois.Dube at videotron.com
[mailto:Jean-Francois.Dube at videotron.com]
Sent: terça-feira, 5 de Novembro de 2013 22:54
To: amsoares at netcabo.pt
Cc: cisco-nsp at puck.nether.net; cisco-nsp
Subject: RE: [c-nsp] %PLATFORM-CIH-5-ASIC_ERROR_SCRUB_THRESH

Hi Antonio,

I had a similar issue and decided to reload the linecard.

pse_pogo_driver[281]: %PLATFORM-CIH-5-ASIC_ERROR_SPECIAL_HANDLE : pse[1]: A sbe error has occurred causing  data corrected. 0x12470007


I don't like to see any messages regarding single bit error (SBE) and even less when it's in packet switching engine (PSE) ASIC so that's why I reloaded the linecard. The messages went away.

I used "show asic-errors all detail location 0/x/CPU0" to see the errors on the linecard.


Cheers,

JF

Jean-François Dubé
Technicien, Opérations Réseau IP
Ingénierie Exploitation des Réseaux
Vidéotron

"cisco-nsp" <cisco-nsp-bounces at puck.nether.net> a écrit sur 2013-10-28
11:52:02 :

> De : "Antonio Soares" <amsoares at netcabo.pt> A : 
> <cisco-nsp at puck.nether.net>, Date : 2013-10-28 11:54 Objet : [c-nsp] 
> %PLATFORM-CIH-5-ASIC_ERROR_SCRUB_THRESH
> Envoyé par : "cisco-nsp" <cisco-nsp-bounces at puck.nether.net>
> 
> Hello Team,
> 
> I'm getting this message:
> 
> ++++++++++++++++++++++++
> pse_pogo_driver[244]: %PLATFORM-CIH-5-ASIC_ERROR_SCRUB_THRESH : 
> pse[1]: A sbe error has occurred causing data corrected. 0x12470009 
> Threshold has
been
> exceeded
> ++++++++++++++++++++++++
> 
> Exactly every 14 minutes and 10 seconds. I found bug CSCts11174 and 
> they
> say:
> 
> ++++++++++++++++++++++++
> Workaround:
> Sometimes an LC reload can fix the issue but it is not guaranteed.
> This does not harm any user or control traffic and should not trigger 
> RMA
or
> EFA in particular.
> ++++++++++++++++++++++++
> 
> Can someone confirm that this is really cosmetic ?
> 
> I'm getting it on a 1X100GBE/CRS-FP140.
> 
> 
> Thanks.
> 
> Regards,
> 
> Antonio Soares, CCIE #18473 (R&S/SP)
> amsoares at netcabo.pt
> http://www.ccie18473.net
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/