[c-nsp] ASR 901 EoMPLS

[Jason Lixfeld]

Do you still need to do that when it's a port-based pw?

Sent from my iPhone

> On Nov 18, 2013, at 8:19 AM, Dimitris Befas <dimitris.befas at gmail.com> wrote:
> 
> Hi Fredrik,
> 
> Please check the command "l2protocol ?" under interface config.
> 
> 
> 2013/11/18 Fredrik Vöcks <fredrik.vocks at bredband2.se>
> 
>> Hi all,
>> 
>> We are having a customer who says he can't forward BPDU packets over an
>> portbased EoMPLS using an ASR 901.
>> 
>> Is this something known or am I missing something? Relevant configuration;
>> 
>> interface TenGigabitEthernet0/1
>> description c_customer433231
>> no keepalive
>> xconnect x.x.x.x 1730 encapsulation mpls
>> 
>> /F
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/