[c-nsp] IPv6 / OSPFv3

[CiscoNSP List]

Hi Everyone,

What is "recommended" practice when configuring OSPFv3/IPv6 Loopbacks?  Do you assign /128's or /64's - If /64's do you need to enable "ipv6 ospf network point-to-point" under the loopback so that the IPv6 address is advertised as a /64 and not as /128?

And Is it any more complicated than enabling "ipv6 ospf nn area n" under the Interfaces you want OSPF to run on? (i.e. If I am just wanting to have my loopback addresses and interpop link addresses in IGP)

Cheers