[c-nsp] IPv6 / OSPFv3

[CiscoNSP List]

Thanks to everyone who replied - /128 it is.

> From: cisconsp_list at hotmail.com
> To: cisco-nsp at puck.nether.net
> Date: Thu, 21 Nov 2013 19:38:51 +1100
> Subject: [c-nsp] IPv6 / OSPFv3
> 
> 
> Hi Everyone,
> 
> What is "recommended" practice when configuring OSPFv3/IPv6 Loopbacks?  Do you assign /128's or /64's - If /64's do you need to enable "ipv6 ospf network point-to-point" under the loopback so that the IPv6 address is advertised as a /64 and not as /128?
> 
> And Is it any more complicated than enabling "ipv6 ospf nn area n" under the Interfaces you want OSPF to run on? (i.e. If I am just wanting to have my loopback addresses and interpop link addresses in IGP)
> 
> Cheers
> 
> 
> 
>  		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/