[c-nsp] 7600 and NAT in vrf

[Dan Benson]

All,

>From reading it seems the 7600 does not support NAT in vrf (without an FWSM) but I thought I would ask the question. I have two interfaces in the same VRF (inside and outside) and I am able to static translate inbound but I am unable to overload with TCP and udp packets. ICMP packets traverse the interfaces but nothing else.   Will this work if I don’t have the VRF?

I am running s72033-adventerprisek9-mz.151-1.SY.bin.

Thanks in advance for your insight.

db