[c-nsp] 7600 and NAT in vrf

[Dan Benson]

Peter,

I am running 6500 Code. 

Thanks, 

db

On Nov 22, 2013, at 11:52 AM, Peter Persson wrote:

> Just curios...
> Why are you using a 6500 firm for a 7600?
> 
> 
> 2013/11/22 Dan Benson <dbenson at swingpad.com>
> All,
> 
> >From reading it seems the 7600 does not support NAT in vrf (without an FWSM) but I thought I would ask the question. I have two interfaces in the same VRF (inside and outside) and I am able to static translate inbound but I am unable to overload with TCP and udp packets. ICMP packets traverse the interfaces but nothing else.   Will this work if I don’t have the VRF?
> 
> I am running s72033-adventerprisek9-mz.151-1.SY.bin.
> 
> Thanks in advance for your insight.
> 
> db
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>