[c-nsp] 7600 and NAT in vrf

[Pete Lumbis]

The question is will basic NAT overload work without VRFs on SX code? Yes,
given the endless list of 6k NAT limitations.


On Fri, Nov 22, 2013 at 10:37 AM, Dan Benson <dbenson at swingpad.com> wrote:

> All,
>
> From reading it seems the 7600 does not support NAT in vrf (without an
> FWSM) but I thought I would ask the question. I have two interfaces in the
> same VRF (inside and outside) and I am able to static translate inbound but
> I am unable to overload with TCP and udp packets. ICMP packets traverse the
> interfaces but nothing else.   Will this work if I don’t have the VRF?
>
> I am running s72033-adventerprisek9-mz.151-1.SY.bin.
>
> Thanks in advance for your insight.
>
> db
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>