[c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ?

Waris Sagheer (waris) waris at cisco.com
Wed Oct 2 12:28:35 EDT 2013

Hi Mostafa,
Can you help with ASR1K L2PT behavior? What is supported on ASR1K?

Hi Chris,
I am copying Mostafa (ASR 1K expert) to confirm the L2PT behavior on ASR1K.
Just a side note from ME perspective, I would recommend using L2PT forward command rather than L2PT tunnel.

Best Regards,


Waris Sagheer
Technical Marketing Manager
Service Provider Access Group
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389

CCIE - 19901


[Think before you print.] Think before you print.

This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:

From: Chris Russell <chris at nifry.com<mailto:chris at nifry.com>>
Organization: ntech
Date: Saturday, August 31, 2013 6:18 AM
To: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: Re: [c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ?

On 21/08/2013 10:00, Chris Russell wrote:
On 21/08/2013 09:54, Adam Vitkovsky wrote:
And I assume no BPDUs are passed either.
Is it possible to issue cmd: "l2protocol peer" or all the l2protocol
commands are rejected altogether?
Just to see if the L2protocol status changes somehow.

  As a final thread closing to this one, with thanks to various people,
especially Adam, who responded -

  L2 tunnelling of control packets (BPDUs) is NOT supported on the



cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list