[c-nsp] c-nsp] VACL limitation in 6509

[Ben Hammadi, Kayssar (NSN - TN/Tunis)]

Dears ,

  After a long case discussed with Cisco TAC , this is the final configuration that make a VACL capture work successfully:  

vlan filter ASTELIA vlan-list 1356,1357,1351,
vlan filter ASTELIA vlan-list 3737,

interface GigabitEthernet9/23
 switchport
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport capture
 
as you can see there is no correlation between the filter and the config on the interface that mean that you cannot configure another filter for another VACL for a different interface.
Does anyone successfully created several VACL on same 6509 switch ?

Br.

BEN HAMMADI Kayssar
 
NOKIA SIEMENS NETWORKS
Lead Engineer -BroadBand Connectivity
JNCIE-M (#471), JNCIE-SP (#1147), CCIP 
Mobile : +216 29 349 952  /  +216 98 349 952
FIX      : +216 71 108 173
Skype : kayssar ben hammadi
kayssar.ben_hammadi at nsn.com