[c-nsp] OSPF Over FR

[M K]

Hi , I have three routers R1 , R2 and R3R1 is the hub and is configured as below
R1#sh run int s0/0.123Building configuration...
Current configuration : 201 bytes!interface Serial0/0.123 multipoint ip address 192.168.123.1 255.255.255.0 snmp trap link-status frame-relay map ip 192.168.123.3 103 broadcast frame-relay map ip 192.168.123.2 102 broadcast
R1#sh run | sec router ospfrouter ospf 1 router-id 1.1.1.1 log-adjacency-changes network 1.1.1.1 0.0.0.0 area 0 network 192.168.14.1 0.0.0.0 area 0 network 192.168.123.1 0.0.0.0 area 0 neighbor 192.168.123.2 neighbor 192.168.123.3
R2#sh run int s0/0 Building configuration...
Current configuration : 190 bytes!interface Serial0/0 ip address 192.168.123.2 255.255.255.0 encapsulation frame-relay clock rate 2000000 frame-relay map ip 192.168.123.1 201 broadcast no frame-relay inverse-arpend
R2#R2#R2#sh run | sec router ospfrouter ospf 1 router-id 2.2.2.2 log-adjacency-changes network 2.2.2.2 0.0.0.0 area 0 network 192.168.123.2 0.0.0.0 area 0 neighbor 192.168.123.1
R3#sh run int s0/0Building configuration...
Current configuration : 190 bytes!interface Serial0/0 ip address 192.168.123.3 255.255.255.0 encapsulation frame-relay clock rate 2000000 frame-relay map ip 192.168.123.1 301 broadcast no frame-relay inverse-arpend
R3#sh run | sec router ospfrouter ospf 1 router-id 3.3.3.3 log-adjacency-changes network 3.3.3.3 0.0.0.0 area 0 network 192.168.123.3 0.0.0.0 area 0 neighbor 192.168.123.1
Why on R1 i cannot receive anything from R2 ?
R1#sh ip route ospf      3.0.0.0/24 is subnetted, 1 subnetsO       3.3.3.0 [110/65] via 192.168.123.3, 00:06:21, Serial0/0.123
Even though the neighborship is up ?
Thanks