[c-nsp] OSPF Over FR

Gert Doering gert at greenie.muc.de
Sun Oct 6 13:01:53 EDT 2013


On Sun, Oct 06, 2013 at 06:08:15PM +0300, M K wrote:
> R1#sh run int s0/0.123Building configuration...
> Current configuration : 201 bytes!interface Serial0/0.123 multipoint ip address snmp trap link-status frame-relay map ip 103 broadcast frame-relay map ip 102 broadcast

Uh.  Could you try to get a reasonable mail client?  Your mails are just
arriving as condensed gibberish, and I'm not going to spend my time trying 
to work out what the original might have been, only to *then* spend more
time trying to answer your question.

As for the original question - I assume it has something to do with 
the NBMA nature of FR and limiting flooding on common interfaces.  I'm
fairly sure that a search for "OSPF frame-relay example" turns up something
useful on cisco.com...  like this one...


title is "Problems with Running OSPF in NBMA and Broadcast Mode over
Frame Relay".

USENET is *not* the non-clickable part of WWW!
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20131006/97e207c9/attachment.sig>

More information about the cisco-nsp mailing list