[c-nsp] Utilize 7600 to backhaul TDM-based channelized DS3's

[Sharlon Carty]

Hello,

How would the IOS configuration look like? This sounds like the same situation I am in right now. 
We have flexwan and SPA cards. 

--sharlon

On Apr 2, 2013, at 4:26 PM, Gert Doering <gert at greenie.muc.de> wrote:

> Hi,
> 
> On Tue, Apr 02, 2013 at 02:32:36PM -0400, Rich Davies wrote:
>> Does anyone have any suggestions in regards to required IOS versions, route
>> processors, or DS3 linecards that are capable of MPLS pseudowire that are
>> applicable for the Cisco 7609?
> 
> A 7301 sitting on top of the 7609 comes to mind...
> 
> Anything that's not ethernet is pain on 6500/7600 - not that it couldn't
> be done (there are the Flexwan cards), but it's more expensive than
> putting a 7301 on top of it, and finding a combination of chassis, Sup,
> IOS train and modules that work is near to impossible.
> 
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                           //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/