[c-nsp] Interworking Question

Adam Vitkovsky adam.vitkovsky at swan.sk
Thu Oct 17 04:53:51 EDT 2013

Looks like the cmd: "connect" with Gig to Serial -will accept serial only if
Serial has an "encapsulation frame-relay" so with "encap ppp" it returns an
error unfortunately. 

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nick
Sent: Wednesday, October 16, 2013 4:21 PM
To: Cisco-nsp
Subject: [c-nsp] Interworking Question

SP Gurus, I have a short term need to provide connectivity between a couple
endpoints for a migration. Customer currently has a DS3 with PPP encap
terminating in an edge 7200VXR, and will be migrating this service to
ethernet and terminating in new router. Wondering if it's possible to use
interworking on the existing terminating router to convert the ppp to
ethernet and hand this connection off via ethernet to new router. Seems like
it would be some sort of combination ATOM and Local Switching, but I'm not
sure it's even possible.

Interworking would be done on RTR1 below:


Thanks for entertaining.
cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list