[c-nsp] private/port-based l2vpn service

[Dodd, Steven]

int g0/x
 service instance X ethernet
  encapsulation default

Then you would proceed to tie the service instance to a bridge domain or xconnect.

-Steve
-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Aaron
Sent: Tuesday, October 29, 2013 1:44 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] private/port-based l2vpn service

As MEF calls an l2vpn, private/port-based (which carries all, tagged or untagged frames) that arrive at an interface.. EPL, EPLAN, EPTREE, I understand the asr9k would implement this with.

 

Int g0/0/0/0

L2transport

 

With no encap needed.  And then you would simply add that interface to the xconnect group:p2p or bg:bd.

 

Question, what is the interface config for doing this exact same thing on an ME3600X ?

 

Aaron

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/