[c-nsp] Nexus 5548 - ERROR: no free statistics counter for a region

[Pete Lumbis]

I /think/ (not 100% sure) that the 5k only supports 256 statistic entries,
so it sounds like when you add the other ACL, with stats per-entry enabled
we run out of space for the stats. I think you'll have to disable the stats
to add the second ACL.


On Tue, Oct 22, 2013 at 6:13 AM, Oswald, Thomas <th.oswald at telekom.de>wrote:

> Hello,
>
> in a little environment I have two nexus 5548 with L3-Daughter-Card. They
> do l2 and l3-switching, ACL-filtering and other things. For operating
> reasons I need statistic counters for all of my ACLs and I think everybody
> on this mailing list can understand this. By now I configured 11 ACLs with
> over all 240 ACEs. That is really not much and as all I can see is that in
> the tcams are enough space for more. But now I want to configure a new ACL
> with just about 120 lines and the command "statistics per-entry" and when I
> try this the switches return the error-code "ERROR: no free statistics
> counter for a region". Is there a way to change the hardware resources to
> make it working? Or is there any other way to make it working? Any
> suggestions?
>
> Regards
> Thomas Oswald
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>