[c-nsp] Multicast

[Harry Hambi]

Wanted to see the multicast traffic counters incrementing/or not, on a specific port


Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Mayers
Sent: 05 September 2013 14:29
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Multicast

On 05/09/13 14:17, Harry Hambi wrote:
> Hi all,
> Is there a command on the 6500 that will show the Multicast traffic
> in/out of a port?. Thanks in advance

What does "show multicast traffic" mean?

If you want to see the raw data packets, you'll need to use SPAN or R/ERSPAN.

If you want to see IGMP joins, "sh ip igmp" and sub-commands.

If you want to see output routes, "sh ip mroute" and sub-commands.

Be more specific!
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


-----------------------------
http://www.bbc.co.uk
This e-mail (and any attachments) is confidential and
may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in
error, please delete it from your system.
Do not use, copy or disclose the
information in any way nor act in reliance on it and notify the sender
immediately.
Please note that the BBC monitors e-mails
sent or received.
Further communication will signify your consent to
this.
-----------------------------