[c-nsp] How to reset password on Sup 2t

[Antonio Soares]

It seems that info is not easy to find. If I were you, I would remove the
Compact Flash from the Card. It will go to rommon since it won't be able to
find a valid boot image. There is this discussion but I don't think it will
be very helpful:

https://supportforums.cisco.com/thread/2211058



Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares at netcabo.pt
http://www.ccie18473.net


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Sai
Sent: sexta-feira, 6 de Setembro de 2013 14:36
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] How to reset password on Sup 2t

I cannot find any documentation on how to reset/recover password on Catalyst
6500E with Supervisor 2T.

Any pointers?

Thanks,
Sai
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/