[c-nsp] N7k VPLS Multicast

Bernhard Schmidt berni at birkenwald.de
Sun Sep 8 04:21:07 EDT 2013


Hi Pete,

Side A:
l2vpn vfi context TEST
   vpn id 100
   autodiscovery bgp signaling ldp
vlan configuration 47
   member vfi TEST

N7K-M108X2-12L towards both core and CE

Side B:
l2vpn vfi context TEST
   vpn id 100
   autodiscovery bgp signaling ldp
vlan configuration 100
   member vfi TEST

interface Ethernet3/48
   description moni-0q1 gb-2
   switchport
   switchport access vlan 100
   no shut

N7K-M108X2-12L towards core, both N7K-M108X2-12L and N7K-M148GS-11L 
towards CE

Side A is a VLAN on a vPC, VFI is only configured on one vPC peer. I 
don't think the issue is vPC related through, I had the same issue when 
manually linking a VFI on a non-vPC N7k with a 6500 xconnect.

Regards,
Bernhard

> Configs and CE facing and core facing line cards?
>
>
> On Fri, Sep 6, 2013 at 9:43 AM, Bernhard Schmidt <berni at birkenwald.de
> <mailto:berni at birkenwald.de>> wrote:
>
>     Hoi,
>
>     I have started testing VPLS on N7k 6.2(2) with VLAN-based VFI membership
>     and I have some problem with IPv6 in the VLAN due to some/most multicast
>     frames getting dropped, which breaks neighbor discovery quite badly.
>     Unicast and Broadcast seem to be unaffected.
>
>     The topology/configuration is quite simple (only two PEs at the moment)
>     and happens with both VPLS BGP Autodiscovery and statically configured
>     neighbors. Has anyone already tested that and can share his results? I
>     strongly suspect "bug", it's a new feature on the platform after all.
>
>     Thanks,
>     Bernhard
>
>     _______________________________________________
>     cisco-nsp mailing list cisco-nsp at puck.nether.net
>     <mailto:cisco-nsp at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-nsp
>     archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>



More information about the cisco-nsp mailing list