[c-nsp] MPLS-TE on ME3600

[Pshem Kowalczyk]

Hi,

On 13 September 2013 03:10, Eric Van Tol <eric at atlantech.net> wrote:
>
> Thanks for the insight.  I've confirmed in the lab that explicit paths allow LSP setup across areas.
>
> And just to confirm, if our switches have no routed ports on the core-facing side, where MPLS and EFPs are configured, enabling FRR will have no effect, right?

No idea, It's possible the the control plan will show that the FRR
(and backup interfaces) are set up, just the dataplane won't be
programmed for it.

kind regards
Pshem