[c-nsp] possible to operate WS-X4908-10GE in line-rate mode?

Tue Sep 17 00:04:11 EDT 2013

I believe for the 4908 it's every other port.

On Fri, Sep 13, 2013 at 3:51 PM, Andy Litzinger <
Andy.Litzinger at theplatform.com> wrote:

> does anyone know if it's possible to use the WS-X4908-10GE in a 4900M so
> that it runs line rate when using only 4 of the 8 ports?  Usually this
> means using certain ports (like 1,3,5,7) and sometimes can be protected by
> turning off oversubscription via the config.
>
> I'm not finding much info on cisco.com or in the archives of this list.
>
> thanks!
> -andy
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>