[c-nsp] C6500 Switching problem

[R S]

IOS 12.2.18SXS.15A

Which is the difference with "all" keyword ? anyway do not appear as well...

no, syncornization is not enabled and we're not sure to insert during business hours, is traffic disruption forecasted ?

The machine is up since 2 years, maybe a good reload ?

tks

> Subject: Re: [c-nsp] C6500 Switching problem
> From: peter at rathlev.dk
> To: dim0sal at hotmail.com
> CC: cisco-nsp at puck.nether.net
> Date: Tue, 17 Sep 2013 15:34:44 +0200
> 
> On Tue, 2013-09-17 at 12:42 +0000, R S wrote:
> > On cisco 6500 we're experience the following problem.
> > 
> > A particular mac-address is seen on port Te1/1:
> > 
> > xxx#sh mac-address-table dynamic address xxxx.yyyy.yyyy
> ...
> > Module 1:
> > *    3  xxxx.yyyy.yyyy   dynamic  Yes          0   Te1/1
> > 
> > It’s not seen on the vlan 3:
> > 
> > xxx#sh mac-address-table dynamic vlan 3
> ...
> > ------+----------------+--------+-----+----------+--------------------------
> > 
> > If I do a clear mac-address-table…
> ...
> 
> What IOS version? What module is Te1/1?
> 
> Does anything change if you use the "all" keyword at the end of the show
> command for the VLAN?
> 
> Do you have MAC address table synchronization enabled?
> 
> http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_m1.html#wp1143362
> 
> -- 
> Peter
> 
>