[c-nsp] VRF Export-map

Darren O'Connor darrenoc at outlook.com
Sun Sep 22 10:11:08 EDT 2013


The counters of a route-map only go up if it's being used to policy route. Which you are not doing.

Thanks
Darren
http://www.mellowd.co.uk/ccie



> From: gunner_200 at live.com
> To: cisco-nsp at puck.nether.net
> Date: Sun, 22 Sep 2013 15:47:06 +0300
> Subject: [c-nsp] VRF Export-map
> 
> Hi all I have established MPLS L3VPN and export-maps on both PEs Everything is working good but my question is why the route-map is not counting?R2#sh route-map route-map EXPORT_MAP, permit, sequence 10  Match clauses:    ip address prefix-lists: R4LOOP   Set clauses:    extended community RT:2.2.2.2:4  Policy routing matches: 0 packets, 0 bytes
> Thanks
> BR,
>  		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
 		 	   		  


More information about the cisco-nsp mailing list