[c-nsp] ME3400E - Shaping vlans?

[CiscoNSP List]

Hi,

Is it possible to shape vlans on the ME3400E? (i.e. Multiple vlans on a trunk port, shaping them at different speeds)?

Ive tried the following (unsuccessfully):

class-map match-all vlan10 


match vlan 10 


policy-map VLAN10_10Mb 


class vlan10 


shape average 9800000 


Switch(config)#interface GigabitEthernet0/1
Switch(config-if)#service-policy output
VLAN10_10Mb 


Match vlan is not supported for this
interface 



 

policy-map VLAN10_10Mb 


class vlan10 


shape average 9800000 


policy-map parent 


class vlan10 


service-policy VLAN10_10Mb 


Switch(config)#interface GigabitEthernet0/1 


Switch(config-if)#service-policy output
parent 


QoS: Configuration failed. Only class-default
is allowed in top level of an output policy

Cheers.