[c-nsp] xconnect not working..

[Raheel Muhammad]

Hi,

U noticed it correctly but i copy pasted it when someone else was
troubleshooting it, so vcid is changed ib the config. Any how we found the
issue by creating xonnect from different loopbacks on both pe's.

Thanka
On 16 Apr 2014 18:00, "Jerry Bacon" <jerryb at startouch.com> wrote:

> -----Original Message-----
> > From: "Raheel Muhammad" <raheel.muhammad at gmail.com>
> >
> > I am facing issues in xconnect, encapsulation is l2tp and xconnect is
> > showing up, but the traffic is not passing, any suggestions?
> configuration
> > is below:
> >
> > interface GigabitEthernet9/8.2521
> >  encapsulation dot1Q 2521
> >  xconnect 10.11.52.6 200 encapsulation l2tpv3 pw-class 200
> > end
> >
> > pseudowire-class 2521
> >  encapsulation l2tpv3
> >  ip local interface Loopback0
> >
> ...
> >
> > PE-II
> >
> > interface GigabitEthernet3/0/2.2521
> >  encapsulation dot1Q 2521
> >  xconnect 213.132.242.208 200 encapsulation l2tpv3 pw-class 200
> > end
> >
> ...
> >
> > pseudowire-class 200
> >  encapsulation l2tpv3
> >  ip local interface Loopback0
> >
>
> Looks to me like you pw-class isn't correct on the first router:
>
> >  xconnect 10.11.52.6 200 encapsulation l2tpv3 pw-class 200
>                                                         ^^^
> > pseudowire-class 2521
>                    ^^^^
>
>
> --
> Jerry Bacon
> Senior Network Engineer
> StarTouch, Inc.
> http://www.startouch.com
> 360-543-5679 ext. 111
> Microwave - Fiber Optics - Internet Services
>
>
>
>
>
>