[c-nsp] EIGRP Authentication on IOS XR

[M K]

Hi and sorry for the late reply
I have tried it and did not work the relation kept down

BR,

> From: oboehmer at cisco.com
> To: gunner_200 at live.com; alumbis at gmail.com
> CC: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] EIGRP Authentication on IOS XR
> Date: Wed, 23 Apr 2014 21:40:00 +0000
> 
> can you add "send-lifetime .." to the key? It might not be active without
> it..
> 
> key chain KEY
>  key 1
>   key-string password cisco
>   cryptographic-algorithm md5
>   send-lifetime 01:01:00 january 01 2014 infinite
> 
> 
> 
> -----Original Message-----
> From: M K <gunner_200 at live.com>
> Date: Wednesday, 23 April 2014 16:49
> To: Pete Lumbis <alumbis at gmail.com>
> Cc: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
> Subject: Re: [c-nsp] EIGRP Authentication on IOS XR
> 
> >No , the only option under the interface is authentication keychain
> >command
> >The cryptographic-algorithm MD5 command is under the key chain command ,
> >I have tried it but did not work for me !
> >
> >Date: Tue, 22 Apr 2014 13:16:14 -0400
> >Subject: Re: [c-nsp] EIGRP Authentication on IOS XR
> >From: alumbis at gmail.com
> >To: gunner_200 at live.com
> >CC: cisco-nsp at puck.nether.net
> >
> >I think the next line after "authentication keychain...." is
> >"cryptographic-algorithm MD5"
> >
> >
> >On Tue, Apr 22, 2014 at 10:55 AM, M K <gunner_200 at live.com> wrote:
> >
> >Hi all
> >
> >I am facing an issue when configuring EIGRP authentication between IOS
> >and IOS XR
> >
> >
> >
> >R1#sh run | sec key chain
> >
> >key chain KEY
> >
> > key 1
> >
> >   key-string cisco
> >
> >
> >
> >R1#sh run int f0/0 | inc authen
> >
> > ip authentication mode eigrp 1 md5
> >
> > ip authentication key-chain eigrp 1 KEY
> >
> >
> >
> >RP/0/0/CPU0:XR1#sh run key chain
> >
> >Tue Apr 22 17:54:14.480 UTC
> >
> >key chain KEY
> >
> > key 1
> >
> >  key-string password cisco
> >
> >
> >
> >router eigrp EIGRP_PROCESS
> >
> > address-family ipv4
> >
> >  autonomous-system 1
> >
> >  interface Loopback0
> >
> >  !
> >
> >  interface GigabitEthernet0/0/0/0
> >
> >   authentication keychain KEY
> >
> >
> >
> >Under the interface GigabitEthernet0/0/0/0 located under the EIGRP
> >process , I did not find an option for choosing MD5
> >
> >
> >
> >Any ideas?
> >
> >
> >
> >Thanks
> >
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> > 		 	   		  
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>